Press Release: ZTE Corporation is proud to announce 5G-A highlights at Mobile World Congress 2024. This initiative aims to unleash the full potential of 5G technology and create limitless value.
Green infrastructure pursuing the perfect bit/watt curve
- Industry’s first constant PA efficiency radio platform for optimal performance
Modern wireless platforms offer near-constant PA efficiency, ensuring optimal performance at all times. This results in 25-30 percent higher PA efficiency and 35 percent lower RRU power consumption than industry averages.
- Industry-first hibernate 0 bits 0 watts
Industry-first hibernation technology has been deployed at scale in more than 300,000 AAUs, reducing AAU power consumption to 5 Watts when there is no traffic. This technology is also applied to his RRU, which consumes only 3 watts when there is no traffic. For small cells, hibernation enables the pRRU to be available at 0 watts when there is no traffic and allows the cell to wake up in seconds when there is a service access attempt.
5G-A B2C: Seamless 10Gbps+ experience
- Uni-Radio allows you to simplify your site by reducing the number of radios by a factor of 10.
Uni-Radio (A+P) is an industry-exclusive 5-band UBR and FDD full-band antenna, Dual-Band AAU, that greatly simplifies and consolidates 7 bands into one, reducing the number of radio units from 10 to 1. Reduce. .
- Industry-exclusive 12TR RRU is extremely environmentally friendly and provides superior energy efficiency
The industry-exclusive dual-band 12TR RRU is evolved based on a new platform to deliver near-constant PA efficiency. This reduces RRU power consumption by 35% below the industry average. With industry-first RF pooling, the 12TR RRU enables output power sharing between sectors. 4*120W in any sector can be used as 4x160W, achieving higher power efficiency.
- Industry’s Best Integrated FDD Massive MIMO Pushes the Capacity Limits of 4G Even More
Tri-band FDD Massive MIMO supports all RATs and NB-IoT from 2G to 5G with an impressive 640W output power in just 115L and achieves up to 6x throughput improvement. In addition, AI beamforming improves FDD Massive MIMO performance by 30%, and industry-unique beamlevel DSS optimizes spectrum utilization to achieve an additional 10% data rate increase.
- Industry’s largest bandwidth mmWave AAU delivers 5G-A 10Gbps+ experience
Industry’s largest 1.6 GHz bandwidth mmWave AAU delivers over 28 Gbps capacity in a single cell and delivers a 10 Gbps experience. This is useful for a variety of scenarios, including fixed wireless access (FWA), high-bandwidth mobile backhaul, and UHD live broadcast.
5G-A B2B: Network and cloud integration, service commissioning in 1 hour
- UniEngine: All-in-one box private 5G solution for core production
UniEngine provides all-in-one integration of 5G core, 5G RAN, and simplified O&M, while providing powerful computing that enables easy deployment of third-party applications. The enhanced deterministic capabilities of the RAN significantly improve service guarantees. Simplified O&M greatly assists even inexperienced companies in deploying private 5G networks and enables end-to-end service performance monitoring.
- Indoor 5G-A campsite creates new possibilities for TV broadcasting and VR entertainment
The suitcase-sized CampSite can be easily installed by one person. It integrates communications and computing and enables 5G-A network setup in less than an hour. Additionally, it incorporates MiCell, the industry’s first mmWave distributed microcell and IF pooling solution to achieve coverage of 2,500 square meters and deliver up to 6 Gbps downlink or 4 Gbps uplink with ultra-low latency . [email protected]% and high reliability. CampSite will facilitate new use cases such as 5G-enabled TV broadcasting, wireless, large-scale and backpack-free VR entertainment, among others.
5G-A B2X: Driving the new economy
- Ultra-reliable 5G-A network and edge cloud integration enable cost-effective V2X for smart transportation
ZTE has introduced the first 5G-A-based vehicle, road, and cloud integrated V2X network to enhance autonomous driving and improve traffic efficiency. With ultra-reliable network and base station edge cloud, [email protected]% delay enables L4 autonomous driving of L2 vehicles at speeds up to 60km/h.
- 5G-A NTN realizes universal connectivity by merging space and ground
ZTE developed the industry’s first NTN ground base station and completed the world’s first 5G IoT-NTN direct cell-to-cell test over S-band, the industry’s first sea test, and NR-NTN laboratory and field tests. These efforts are aimed at providing emergency communications, wide area IoT, and internet service capabilities.
Ubiquitous intelligence: Achieving high efficiency in all directions
- 5G-A BBU, unifying communications and compute for rich AI applications
5G-A BBU provides seamless integration of communication and computing functions. Base station native AI leverages its computational power to enhance its RAN intelligence, enabling high-efficiency service guarantees to increase traffic, implement more accurate power-saving strategies, and facilitate L4 autonomous network O&M I’ll make it. Opening up computational resources to third parties enables cost-effective deployment of apps at base stations, expanding the scope of new applications.
- AIGC enhances uSmartNet commercial used during Asian Games
Based on AIGC and digital twin technology, ZTE’s uSmartNet achieved the industry’s first smart gaming guarantee during the Hangzhou Asian Games. This resulted in zero major issues or major customer complaints, a 15% increase in operational efficiency, and a 30% reduction in workload.
