Disclosure: Some links on this page are monetized through the Skimlinks, Amazon, Rakuten Ads, and eBay affiliate programs, and Liliputing may earn a commission if you purchase something after clicking on one of these links. there is. All prices are subject to change and this article reflects only the prices available at the time of publication.
The Raspberry Pi 5 has the fastest processor ever in a Raspberry Pi computer, but that’s just one of the differences from previous models. The other is a PCIe connector that allows for high-speed connections to expansion boards.
Many companies use that PCIe connector to build HATs that allow you to connect PCIe NVMe SSDs to your Raspberry Pi 5. However, MCUzone MPW7 is a little different. A small board to which you can connect an M.2 2230 module. MPW7 is available from AliExpress, starting at $10 (excluding shipping).
Why add an M.2 2230 connector to the Raspberry Pi 5? Because while this little computer has built-in support for wireless connectivity, the integrated hardware tops out at WiFi 5 and Bluetooth 5.0. Because it is.
This adapter allows you to add a WiFi 6, WiFi 6E, or WiFi 7 module to support higher speeds, lower latency, additional network bandwidth, and more, among other things. According to MCUZone, this board supports the following wireless modules from Intel:
The MPW7’s starting price of $10 includes the board, an FPC cable (to connect to the Raspberry Pi 5’s PCIe interface), and four screws to secure the board to the top of a single-board computer. be careful.
Users planning to add a wireless module using this board are advised to add at least $2 for the bundle, which also includes a pair of wireless antennas. Alternatively, you can spend a little more and buy a bundle that also includes an aluminum case designed to house the Raspberry Pi 5 + MPW7.
But MPW7 is not only Convenient for connecting wireless cards. It can also be used with his other M.2 2230 cards, such as the AI accelerator with Google Edge TPU coprocessor.
Another thing to keep in mind is that if you want to use the MPW7 for Bluetooth, you’ll need to connect a cable from the connector on the board to one of the Raspberry Pi’s USB ports.
Via CNX software
